Amazon Fire TV Sticks are Android-based devices available from JB Hi-Fi, Harvey Norman, and Amazon Australia. The Fire TV Stick 4K ($60) is one of the most affordable ways to put SPARC on a screen.
Sideloading required. The SPARC Player app is not currently on the Amazon Appstore. Setup takes an extra 5 minutes but no computer is needed — see the guide below.
Available at
Most stores carry Fire TV Stick 4K in-store. Same-day pickup available in major Australian cities.
All current Fire TV models are compatible with SPARC. Older 1st and 2nd gen sticks (HD only, 1 GB RAM) are not recommended for production use.
~$60 AUD
The best value Fire TV for SPARC. Handles 4K content, runs SPARC smoothly. Available at JB Hi-Fi, Harvey Norman, and Amazon.
~$80 AUD
Slightly faster processor and Wi-Fi 6E support. Worth the extra $20 if you're in a dense Wi-Fi environment.
~$160 AUD
The most powerful Fire TV device. Comes with an Ethernet adapter — important for reliable commercial deployments. Recommended for video walls or demanding content.
~$40 AUD
HD only — not 4K. Suitable for standard 1080p signage on a tight budget. Not recommended for video walls or complex multi-zone layouts.
The sideload step adds about 5 minutes but requires no computer. Full process: under 10 minutes.
Connect the Fire TV Stick to an HDMI port and power it via USB. Follow the standard Amazon setup to connect to Wi-Fi and sign in (or skip sign-in if you prefer). A Fire TV account is not required to run SPARC.
Go to Settings > My Fire TV > Developer Options and turn on 'Apps from Unknown Sources'. This allows you to install the SPARC Player app, which is not (currently) listed in the Amazon Appstore.
Download the SPARC Player APK from your SPARC dashboard (Settings > Downloads > Android APK). Use the Downloader app (free on Amazon Appstore) to download and install the APK directly on the Fire TV. Enter the APK download URL from your dashboard.
Launch SPARC Player. It displays a 6-character pairing code. Log into mysparc.app > Screens > Add Screen and enter the code. Your Fire TV screen will be active and ready for content within 30 seconds.
Fire TV devices need a few settings adjusted for always-on signage use.
For reliable 24/7 operation, use the Fire TV Cube with its included Ethernet adapter rather than relying on Wi-Fi.
Disable the Fire TV screensaver: Settings > Display > Screensaver > Start Time > Never.
Turn off 'Sleep' in Settings > My Fire TV > Power > Sleep to keep the display on during scheduled hours.
The Downloader app (free, Amazon Appstore) is the easiest way to sideload the SPARC APK — no computer required.
If the screen shows Amazon home after a period of inactivity, set Display > Turn Off Display to 'Never'.